Breaking News

HOW DOES RADAR WORK?

HOW DOES RADAR WORK?

HOW DOES RADAR WORK? Here's a summary of how radar works:


  1. Magnetron generates high-frequency radio waves.
  2. Duplexer switches magnetron through to antenna.
  3. Antenna acts as transmitter, sending narrow beam of radio waves through the air.
  4. Radio waves hit enemy airplane and reflect back.
  5. Antenna picks up reflected waves during a break between transmissions. Note that the same antenna acts as both transmitter and receiver, alternately sending out radio waves and receiving them.
  6. Duplexer switches antenna through to receiver unit.
  7. Computer in receiver unit processes reflected waves and draws them on a TV screen.
  8. Enemy plane shows up on TV radar display with any other nearby targets.
Whether it's mounted on a plane, a ship, or anything else, a radar set needs the same basic set of components: something to generate radio waves, something to send them out into space, something to receive them, and some means of displaying information so the radar operator can quickly understand it.

The radio waves used by radar are produced by a piece of equipment called a magnetron. Radio waves are similar to light waves: they travel at the same speed—but their waves are much longer and have much lower frequencies. Light waves have wavelengths of about 500 nanometers (500 billionths of a meter, which is about 100–200 times thinner than a human hair), whereas the radio waves used by radar typically range from about a few centimeters to a meter—the length of a finger to the length of your arm—or roughly a million times longer than light waves.

Both light and radio waves are part of the electromagnetic spectrum, which means they're made up of fluctuating patterns of electrical and magnetic energy zapping through the air. The waves a magnetron produces are actually microwaves, similar to the ones generated by a microwave oven. The difference is that the magnetron in a radar has to send the waves many miles, instead of just a few inches, so it is much larger and more powerful.


Once the radio waves have been generated, an antenna, working as a transmitter, hurls them into the air in front of it. The antenna is usually curved so it focuses the waves into a precise, narrow beam, but radar antennas also typically rotate so they can detect movements over a large area. The radio waves travel outward from the antenna at the speed of light (186,000 miles or 300,000 km per second) and keep going until they hit something. Then some of them bounce back toward the antenna in a beam of reflected radio waves also traveling at the speed of light. The speed of the waves is crucially important. If an enemy jet plane is approaching at over 3,000 km/h (2,000 mph), the radar beam needs to travel much faster than this to reach the plane, return to the transmitter, and trigger the alarm in time. That's no problem, because radio waves (and light) travel fast enough to go seven times around the world in a second! If an enemy plane is 160 km (100 miles) away, a radar beam can travel that distance and back in less than a thousandth of a second.

The antenna doubles up as a radar receiver as well as a transmitter. In fact, it alternates between the two jobs. Typically it transmits radio waves for a few thousandths of a second, then it listens for the reflections for anything up to several seconds before transmitting again. Any reflected radio waves picked up by the antenna are directed into a piece of electronic equipment that processes and displays them in a meaningful form on a television-like screen, watched all the time by a human operator. The receiving equipment filters out useless reflections from the ground, buildings, and so on, displaying only significant reflections on the screen itself. Using radar, an operator can see any nearby ships or planes, where they are, how quickly they're traveling, and where they're heading. Watching a radar screen is a bit like playing a video game—except that the spots on the screen represent real airplanes and ships and the slightest mistake could cost many people's lives.

There's one more important piece of equipment in the radar apparatus. It's called a duplexer and it makes the antenna swap back and forth between being a transmitter and a receiver. While the antenna is transmitting, it cannot receive—and vice-versa. Take a look at the diagram in the box below to see how all these parts of the radar system fit together.


Source Image and Article : 
http://www.explainthatstuff.com/radar.html

Thanks for visit Airlines Aviation Lover Blog

No comments